Navigation

Install MongoDB Enterprise Edition on Debian

On this page

MongoDB Atlas

MongoDB Atlas is a hosted MongoDB service option in the cloud which requires no installation overhead and offers a free tier to get started.

Overview

Use this tutorial to install MongoDB 4.4 Enterprise Edition using the apt package manager.

MongoDB Enterprise Edition is available on select platforms and contains support for several features related to security and monitoring.

MongoDB Version

This tutorial installs MongoDB 4.4 Enterprise Edition. To install a different version of MongoDB Enterprise, use the version drop-down menu in the upper-left corner of this page to select the documentation for that version.

Considerations

Platform Support

MongoDB 4.4 Enterprise Edition supports the following 64-bit Debian releases on x86_64 architecture:

  • Debian 10 “Buster”
  • Debian 9 “Stretch”

MongoDB only supports the 64-bit versions of these platforms.

See Supported Platforms for more information.

Windows Subsystem for Linux (WSL) - Unsupported

MongoDB does not support the Windows Subsystem for Linux (WSL).

Production Notes

Before deploying MongoDB in a production environment, consider the Production Notes document which offers performance considerations and configuration recommendations for production MongoDB deployments.

Official MongoDB Packages

To install MongoDB Enterprise on your Debian system, these instructions will use the official mongodb-enterprise package, which is maintained and supported by MongoDB Inc. The official mongodb-enterprise package always contains the latest version of MongoDB, and is available from its own dedicated repo.

Important

The mongodb package provided by Debian is not maintained by MongoDB Inc. and conflicts with the official mongodb-enterprise package. If you have already installed the mongodb package on your Debian system, you must first uninstall the mongodb package before proceeding with these instructions.

See MongoDB Enterprise Edition Packages for the complete list of official packages.

Install MongoDB Enterprise Edition

Follow these steps to install MongoDB Enterprise Edition using the apt package manager.

1

Import the public key used by the package management system.

From a terminal, issue the following command to import the MongoDB public GPG Key from https://www.mongodb.org/static/pgp/server-4.4.asc:

copy 
wget -qO - https://www.mongodb.org/static/pgp/server-4.4.asc | sudo apt-key add -

The operation should respond with an OK.

However, if you receive an error indicating that gnupg is not installed, you can:

  1. Install gnupg and its required libraries using the following command:

    copy 
    sudo apt-get install gnupg

  2. Once installed, retry importing the key:

    copy 
    wget -qO - https://www.mongodb.org/static/pgp/server-4.4.asc | sudo apt-key add -
2

Create a /etc/apt/sources.list.d/mongodb-enterprise.list file for MongoDB.

Create the list file using the command appropriate for your version of Debian:

copy 
echo "deb http://repo.mongodb.com/apt/debian buster/mongodb-enterprise/4.4 main" | sudo tee /etc/apt/sources.list.d/mongodb-enterprise.list
copy 
echo "deb http://repo.mongodb.com/apt/debian stretch/mongodb-enterprise/4.4 main" | sudo tee /etc/apt/sources.list.d/mongodb-enterprise.list

If you’d like to install MongoDB Enterprise packages from a particular release series, you can specify the release series of a version of MongoDB that is supported for your Debian build in the repository configuration. For example, to restrict your system to the 4.2 release series, add the following repository:

copy 
echo "deb http://repo.mongodb.com/apt/debian buster/mongodb-enterprise/4.2 main" | sudo tee /etc/apt/sources.list.d/mongodb-enterprise-4.2.list
copy 
echo "deb http://repo.mongodb.com/apt/debian stretch/mongodb-enterprise/4.2 main" | sudo tee /etc/apt/sources.list.d/mongodb-enterprise-4.2.list
3

Reload local package database.

Issue the following command to reload the local package database:

copy 
sudo apt-get update
4

Install the MongoDB Enterprise packages.

Install MongoDB Enterprise.

Issue the following command:

copy 
sudo apt-get install -y mongodb-enterprise

Install a specific release of MongoDB Enterprise.

To install a specific release, you must specify each component package individually along with the version number, as in the following example:

copy 
sudo apt-get install -y mongodb-enterprise=4.4.1 mongodb-enterprise-server=4.4.1 mongodb-enterprise-shell=4.4.1 mongodb-enterprise-mongos=4.4.1 mongodb-enterprise-tools=4.4.1

If you only install mongodb-enterprise=4.4.1 and do not include the component packages, the latest version of each MongoDB package will be installed regardless of what version you specified.

Pin a specific version of MongoDB Enterprise.

Although you can specify any available version of MongoDB, apt-get upgrades the packages when a newer version becomes available. To prevent unintended upgrades, pin the package. To pin the version of MongoDB at the currently installed version, issue the following command sequence:

copy 
echo "mongodb-enterprise hold" | sudo dpkg --set-selections
echo "mongodb-enterprise-server hold" | sudo dpkg --set-selections
echo "mongodb-enterprise-shell hold" | sudo dpkg --set-selections
echo "mongodb-enterprise-mongos hold" | sudo dpkg --set-selections
echo "mongodb-enterprise-tools hold" | sudo dpkg --set-selections

Run MongoDB Enterprise Edition

By default, MongoDB instance stores:

  • its data files in /var/lib/mongodb
  • its log files in /var/log/mongodb

If you installed via the package manager, these default directories are created during the installation.

If you installed manually by downloading the tarballs, you can create the directories using mkdir -p <directory> or sudo mkdir -p <directory> depending on the user that will run MongoDB. (See your linux man pages for information on mkdir and sudo.)

By default, MongoDB runs using the mongodb user account. If you change the user that runs the MongoDB process, you must also modify the permission to the /var/lib/mongodb and /var/log/mongodb directories to give this user access to these directories.

To specify a different log file directory and data file directory, edit the systemLog.path and storage.dbPath settings in the /etc/mongod.conf. Ensure that the user running MongoDB has access to these directories.

Most Unix-like operating systems limit the system resources that a process may use. These limits may negatively impact MongoDB operation, and should be adjusted. See UNIX ulimit Settings for the recommended settings for your platform.

Note

Starting in MongoDB 4.4, a startup error is generated if the ulimit value for number of open files is under 64000.

Procedure

Follow these steps to run MongoDB Enterprise Edition on your system. These instructions assume that you are using the official mongodb-enterprise package – not the unofficial mongodb package provided by Debian – and are using the default settings.

Init System

To run and manage your mongod process, you will be using your operating system’s built-in init system. Recent versions of Linux tend to use systemd (which uses the systemctl command), while older versions of Linux tend to use System V init (which uses the service command).

If you are unsure which init system your platform uses, run the following command:

copy 
ps --no-headers -o comm 1

Then select the appropriate tab below based on the result:

  • systemd - select the systemd (systemctl) tab below.
  • init - select the System V Init (service) tab below.

1

Start MongoDB.

You can start the mongod process by issuing the following command:

copy 
sudo systemctl start mongod

If you receive an error similar to the following when starting mongod:

Failed to start mongod.service: Unit mongod.service not found.

Run the following command first:

copy 
sudo systemctl daemon-reload

Then run the start command above again.

2

Verify that MongoDB has started successfully.

copy 
sudo systemctl status mongod

You can optionally ensure that MongoDB will start following a system reboot by issuing the following command:

copy 
sudo systemctl enable mongod
3

Stop MongoDB.

As needed, you can stop the mongod process by issuing the following command:

copy 
sudo systemctl stop mongod
4

Restart MongoDB.

You can restart the mongod process by issuing the following command:

copy 
sudo systemctl restart mongod

You can follow the state of the process for errors or important messages by watching the output in the /var/log/mongodb/mongod.log file.

5

Begin using MongoDB.

Start a mongo shell on the same host machine as the mongod. You can run the mongo shell without any command-line options to connect to a mongod that is running on your localhost with default port 27017:

copy 
mongo

For more information on connecting using the mongo shell, such as to connect to a mongod instance running on a different host and/or port, see The mongo Shell.

To help you start using MongoDB, MongoDB provides Getting Started Guides in various driver editions. For the driver documentation, see Start Developing with MongoDB.

1

Start MongoDB.

Issue the following command to start mongod:

copy 
sudo service mongod start
2

Verify that MongoDB has started successfully

Verify that the mongod process has started successfully:

copy 
sudo service mongod status

You can also check the log file for the current status of the mongod process, located at: /var/log/mongodb/mongod.log by default. A running mongod instance will indicate that it is ready for connections with the following line:

[initandlisten] waiting for connections on port 27017

3

Stop MongoDB.

As needed, you can stop the mongod process by issuing the following command:

copy 
sudo service mongod stop
4

Restart MongoDB.

Issue the following command to restart mongod:

copy 
sudo service mongod restart
5

Begin using MongoDB.

Start a mongo shell on the same host machine as the mongod. You can run the mongo shell without any command-line options to connect to a mongod that is running on your localhost with default port 27017:

copy 
mongo

For more information on connecting using the mongo shell, such as to connect to a mongod instance running on a different host and/or port, see The mongo Shell.

To help you start using MongoDB, MongoDB provides Getting Started Guides in various driver editions. For the driver documentation, see Start Developing with MongoDB.

Uninstall MongoDB

To completely remove MongoDB from a system, you must remove the MongoDB applications themselves, the configuration files, and any directories containing data and logs. The following section guides you through the necessary steps.

Warning

This process will completely remove MongoDB, its configuration, and all databases. This process is not reversible, so ensure that all of your configuration and data is backed up before proceeding.

1

Stop MongoDB.

Stop the mongod process by issuing the following command:

copy 
sudo service mongod stop
2

Remove Packages.

Remove any MongoDB packages that you had previously installed.

copy 
sudo apt-get purge mongodb-enterprise*
3

Remove Data Directories.

Remove MongoDB databases and log files.

copy 
sudo rm -r /var/log/mongodb
sudo rm -r /var/lib/mongodb

Additional Information

Localhost Binding by Default

By default, MongoDB launches with bindIp set to 127.0.0.1, which binds to the localhost network interface. This means that the mongod can only accept connections from clients that are running on the same machine. Remote clients will not be able to connect to the mongod, and the mongod will not be able to initialize a replica set unless this value is set to a valid network interface.

This value can be configured either:

  • in the MongoDB configuration file with bindIp, or
  • via the command-line argument --bind_ip

Warning

Before binding to a non-localhost (e.g. publicly accessible) IP address, ensure you have secured your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.

For more information on configuring bindIp, see IP Binding.

MongoDB Enterprise Edition Packages

MongoDB Enterprise Edition is available from its own dedicated repository, and contains the following officially-supported packages:

Package Name Description
mongodb-enterprise A metapackage that automatically installs the component packages listed below.
mongodb-enterprise-server Contains the mongod daemon and associated configuration and init scripts.
mongodb-enterprise-mongos Contains the mongos daemon.
mongodb-enterprise-shell Contains the mongo shell.
mongodb-enterprise-cryptd Contains the mongocryptd binary
mongodb-enterprise-tools

A metapackage that automatically installs the component packages listed below:

Package Name Description
mongodb-database-tools

Contains the following MongoDB database tools:
mongodb-enterprise-database-tools-extra

Contains the following MongoDB support tools:

© MongoDB, Inc 2008-present. MongoDB, Mongo, and the leaf logo are registered trademarks of MongoDB, Inc.